Section V. FUEL SYSTEM

TM 9-2320-269-34-1

Section V. FUEL SYSTEM

Page

Ether Start Control Cable .............................

2-369

Fuel Supply Lines ........................................

2-259

Ether Starting Aid .........................................

2-374

Fuel Tank ....................................................

2-331

Ether Supply Lines .......................................

2-384

Governor .....................................................

2-334

Filter Heads ...................................................

2-361

Injection Pump Drive ...................................

2-325

Fuel Injection Pump.......................................

2-278

Injection Pump Mounting

Fuel Injectors ................................................

2-245

Brackets ......................................................

2-317

Fuel Return Lines ..........................................

2-270

FUEL INJECTORS

This task covers:

a. Removal (page 2-246)

d. Cleaning/Inspection (page 2-251)

b. Testing (page 2-248)

e. Assembly (page 2-253)

c. Disassembly (page 2-249)

f. Installation (page 2-255)

INITIAL SETUP

Tools

Materials/Parts

Extension, 3/8-inch drive, 3-inch

Cap, dust (two required)

Handle, ratchet, 3/8-inch drive

Fuel, diesel, No. 2 (item 17, appendix B)

Handle, ratchet, 1/2-inch drive

Gasket, injector holder cap

Holding fixture, injector

Lockwashers (three required)

Pliers, slip-joint

Packing, fuel injector

Pump, nozzle test

Rags, wiping (item 42, appendix B)

Socket, 3/8-inch drive, 1/2-inch

Solvent, drycleaning (item 49, appendix B)

Socket, deep well, 1/2-inch drive,

Shim set, adjusting

7/8-inch, 12-point

Tag, marking (item 50, appendix B)

Screwdriver, flat-tip, 1/8-inch

Tallow, mutton (item 51, appendix B)

Tool set, nozzle cleaning:

cleaning needles

Personnel Required

special chamber scraper

seat scraper

One

wood polishing stick

Vise, machinist's

Equipment Condition

Vise, pin

Wrench, open-end, 1/2-inch

Air cleaner removed with engine in vehicle

Wrench, open-end, 11/16-inch

(TM 9-2320-269-20-1).

Wrench, torque, 3/8-inch-drive

Left-side hood panel raised with engine in

Wrench, torque, 1/2-inch drive

vehicle (TM 9-2320-269-20-1).

Fuel supply lines removed for removal of

all injectors (page 2-259).

Fuel return lines removed for removal of

all injectors (page 2-270)

2-245