FUEL SUPPLY LINES

TM 9-2320-269-34-1

FUEL SUPPLY LINES

This task covers:

a. Removal(page 2-259)

b. Installation

Cleaning /Inspection (page 2-265)

INITIAL SETUP:

Tools

Materials/Parts

Extension, 3/8-inch drive, 3-inch

Cap, dust (six required)

Extension, 318-inch drive, 10-inch

Fuel, diesel, No 2 (item 17, appendix B)

Handle, ratchet, 3/8-inch drive

Lockwasher, clamp (two required)

Pan, drain

Rags, wiping (item 42, appendix B)

Screwdriver, fiat-tip, 1/4-inch

Tag, marking (item 50, appendix B)

Socket, 3/8-inch drive, 1/2-inch

Socket, 318-inch drive, 9116-inch

Personnel Required

Wrench, crowfoot attachment, 3/8-inch

drive, 1116-inch

One

Wrench, open-end, 11/16-inch

Equipment Condition

Air cleaner removed with engine in vehicle

(TM 9-2320-269-20-1).

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

NOTE

This procedure is for the fuel supply pump, fuel injection pump, and fuel injector front left

side (number one cylinder) supply line. The other seven injector supply lines are

removed in a similar way.

2-259