|
|
TM 9-2320-269-341
FILTER HEADS
This task covers:
e. Cleaning (page 2-364)
f. Inspection/Replacement (page 2-365)
a. Primary Filter Head Removal
g. Secondary Filter Head Assembly
b. Primary Filter Head Disassembly
h. Secondary Filter Head Installation
c. Secondary Filter Head Removal
i. Primary Filter Head Assembly (page 2-
367)
d. Secondary Filter Head Disassembly
j. Primary Filter Head Installation (page 2-
367)
INITIAL SETUP
Tools
Materials/Parts - Continued
Extension, 3/8-inch drive,
Rags, wiping (item 42, appendix B)
3-inch
Solvent, drycleaning (item 49, appendix B)
Handle, ratchet, 3/8-inch drive
Tag, marking (item 50, appendix B)
Knife, putty
Socket, 3/8-inch drive,
Personnel Required
9/16-inch
Wrench, open-end, 3/8-inch
One
Wrench, open-end, 7/16-inch
Wrench, open-end, 9/16-inch
Equipment Condition
Wrench, open-end, 3/4-inch
Wrench, open-end, 5/8-inch
Fuel filters removed (TM 9-2320-269-201).
Wrench, open-end, 11/16-inch
Right side hood panel raised
(two required)
(TM 9-2320-269-20-1).
Materials/Parts
Cap, dust, 3/4-inch (three required)
(item 4, appendix B)
Cap, dust, 11/16-inch (item 3,
appendix B)
Lockwasher, primary filter base
(two required)
Lockwasher, secondary filter base
(three required)
2-361
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |