|
|
TM 9-2320-269-34-1
FILTER HEADS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
SECONDARY FILTER HEAD REMOVAL - CONTINUED
11.
Engine (1)
Three screws (2),
a.
Using 9/16-inch socket and ratchet
lockwashers (3),
handle with 3/8-inch drive, unscrew
and secondary filter
and take out.
base (4)
b.
Take off.
c.
Get rid of lockwashers (3).
SECONDARY FILTER HEAD DISASSEMBLY
12.
Secondary filter
Air bleeder
Using 7/16-inch open-end wrench,
base (4)
cock (5)
unscrew and take out.
NOTE
Tag couplings with position to insure proper installation.
13.
Coupling (6)
Using 5/8-inch open-end wrench, unscrew
and take out.
14.
Elbow (7)
Using 11/16-inch open-end wrench,
unscrew and take out.
15.
Elbow (7)
Coupling (8)
Using 5/8-inch and 11/16-inch open-end
wrenches, unscrew and take out.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions, (page 2-46).
16.
Gasket surfaces
Using putty knife, clean away dirt and
gasket material.
WARNING
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using
solvent. Failure to observe these precautions could cause serious injury or death.
17.
All parts
a.
Clean in drycleaning solvent.
b.
Wipe dry with clean, dry rags.
2-364
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |