|
|
TM 9-2320-269-34-1
FUEL INJECTION PUMP - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install fuel return lines (page 2-270).
2.
Install fuel supply lines (page 2-259).
3.
Install air cleaner (TM 9-2320-269-20-1).
4.
Install transmission cover (TM 9-2320-269-20-2).
5.
Install engine cover (TM 9-2320-269-20-2).
TASK ENDS HERE
INJECTION PUMP MOUNTING BRACKETS
This task covers:
a. Removal (page 2-318)
c. Inspection/Replacement (page 2-321)
b. Cleaning (page 2-321)
d. Installation (page 2-322)
INITIAL SETUP
Tools
Materials/Parts - Continued
Extension, 3/8-inch drive, 6-inch
Rags, wiping (item 42, appendix B)
Handle, ratchet, 3/8-inch drive
Solvent, dry-cleaning (item 49, appendix B)
Socket, 3/8-inch drive, 9/16-inch
Wrench, open-end, 3/8-inch
Personnel Required
Wrench, open-end, 7/16-inch
(two required)
One
Wrench, open-end, 9/16-inch
Equipment Condition
Materials/Parts
Air cleaner removed (TM 9-2320-260-20-1).
Lockwasher, support to brace
Lockwasher, brace to pump (two required)
Lockwasher, strap to bracket (two required)
Lockwasher, strap bracket and cable
Lockwasher, strap
Lockwasher, strap to bracket
2-317
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |