Figure D-19. Wooden Blocks

TM 9-2320-360-20-2

Section III. ILLUSTRATED LIST OF MANUFACTURED ITEMS (CONT)

(1) Fabricate from MML751 lumber stock.

(2) Using saw and standard planing machine, cut stock to size required in table D-14.

Figure D-19. Wooden Blocks

Table D-14. Wooden Blocks

PARAGRAPH NO.

FINISHED DIMENSIONS OF BLOCK

IN. (CM)

1-1/2 x 3-1/2 x 8 (3.8 x 8.9 x 20.3)

3-1/2 x 3-1/2 x 9-3/4 (8.9 x 8.9 x 24.8)

3/4 x 1-1/2 x 12 (1.9 x 3.8 x 30.5)

(1) Fabricate from 8-gage and 10-gage wire.

(2) Using wire cutters, cut two pieces of 8-gage wire to 180 in. (457 cm) and two pieces of 10-gage wire to 180 in.

(457 cm).

(3) Splice two 12 in. (305 mm) pieces of 8-gage wire to existing 8-gage wires.

(4) Strip ends of wire 1/4 in. (6.4 mm).

(5) Attach terminals D-351-38 to 8-gage wire.

(6) Attach terminal C-340-38 to both 10-gage wires.

(7) Crimp six terminals 12047680 to end of wires.

(8) Install six terminals 12047680 in connector 12066317.

Figure D-20. Jumper Wire

D-26