2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
14-4. FIFTH WHEEL RAMP/EXTENSION REPLACEMENT
This task covers:
Removal
Follow-On Maintenance
Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut off (TM 9-2320-360-10).
Locknuts (40) (Item 62, Appendix G)
Parking brake on (TM 9-2320-360-10).
Locknuts (4) (Item 47, Appendix G)
Wheels chocked.
Locknuts (2) (Item 63, Appendix G)
Pin, Cotter (Item 150, Appendix G)
Tools and Special Tools
Tool Kit, Gent Mech (Item 54, Appendix F)
Personnel Required
Blocks, Wooden (4) (Figure D-19, Appendix D)
Two
Eye, Lifting (Figure D-21, Appendix D)
Socket Wrench Set, 314 In. (Item 46,
Wrench, Torque, 0-600 Lb-Ft (Item 74,
a. Filth Wheel Ramp Removal
NOTE
Left and right ramps are replaced the same way.
(1) Remove cotter pin (1) from mud flap
assembly (2). Discard cotter pin.
(2) Remove mud flap assembly (2) from ramp
(3).
(3) Remove two locknuts (4), screws (5),
bracket (6), and plate (7) from ramp (3).
Discard locknuts.
14-7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |