2320-01-318-9902 EIC:B5C, VOLUME NO. 2">
|
|
TM 9-2320-360-20-2
Section III. ILLUSTRATED LIST OF MANUFACTURED ITEMS (CONT)
(1) Fabricate from 1/2 x 6 in. (12.7 x 152 mm) cold rolled steel.
(2) Thread size 7/16 x 14 x 1 in. (25.4 mm) long.
(3) Heat unthreaded end and bend over 1-1/4 in. (32 mm) diameter rod.
(4) Dimensions are in inches (millimeters).
Figure D-21. Lifting Eye
(1) Fabricate from bulk hose part number 26241.
(2) Using suitable cutting device, cut hose to 6 in. (152.4 mm).
(3) Install hose/pipe straight adapter, part number AN 840-9S, on hose.
(4) Dimensions are in inches (millimeters).
Figure D-22. Funnel Adapter
Change 2 D-27
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |