 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
STARTING MOTOR
This task covers:
a.
No-Load Test (page 2-429)
e. Assembly (page 2-446)
b.
Disassembly (page 2-432)
f
Adjustment (page 2-459)
c.
Cleaning (page 2-442)
d.
Inspection/Replacement and Testing
INITIAL SETUP
Tools
Tools - Continued
Battery, storage, 12-volt
Socket, deep well, 3/8-inch drive,
Bit, drill, 23/64-inch
1/2-inch
Bit, key, socket-head screw, 3/8-inch
Test fixture, armature
drive, 7/32-inch
Test stand, automotive generator
Bit, screwdriver, cross-tip, 1/2-inch
and starter
drive, number four
Vise, machinist's
Bit, screwdriver, flat-tip, 112-inch
Wrench, box-end, 7/16-inch
drive, 15/16-inch
Wrench, box-end, 3/4-inch
Blade, hacksaw
Wrench, torque, 3/8-inch drive,
Cable, jumper (three required)
0-200 in-lb capacity
Caliper, micrometer
Caps, vise jaw
Materials/Parts
Compresser, reciprocating air,
power driven
Detergent, non-sudsing (item 15, appendix B)
Extension, 3/8-inch drive, 3-inch
Gasket, field frame plug (two required)
Gage, thickness
Gasket, lever housing plug
Gun, air blow
Grease, oil soluble (item 21, appendix B)
Hammer, ball-peen, machinist's, 2-oz
Lockwasher, terminal connector
Handle, ratchet, 3/8-inch drive
Lockwasher, solenoid terminal connector
Handle, ratchet, 1/2-inch drive
Lockwasher, drive housing (five required)
Handle, speeder, 1/4-inch drive
Lockwasher, end plate (four required)
Hose, air compressor
Lockwasher, end plate terminal connector
Key, socket-head screw, 3/16-inch
Nut, self-locking, plunger
Pliers, snapring
Packing, preformed, lever housing
Punch, drive-pin, 5/32-inch
Packing, preformed, lever shaft (two
Rule, steel, machinist's, 6-inch
required)
Screwdriver, flat-tip, 1/8-inch
Packing, preformed, end plate
Screwdriver, flat-tip, 1/6-inch
Packing, preformed, drive housing
Screwdriver, flat-tip, 3/16-inch
Rags, wiping (item 42, appendix B)
(two required)
Sandpaper, number 00 (item 43, appendix B)
Screwdriver, flat-tip, 1/4-inch
Seal, lever housing, armature shaft
Screwdriver, flat-tip, 3/8-inch
Solvent, drycleaning (item 49, appendix B)
Scribe, machinist's
Tag, marking (item 50, appendix B)
Socket, 1/4-inch drive, 5/16-inch
Tape, pressure sensitive (item 54,
Socket, 3/8-inch drive, 7/16-inch,
appendix B)
6 point
Socket, 1/2-inch drive, 314-inch
2-428
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals