|
|
TM 9-2320-269-34-1
STARTING MOTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY
72.
End plate (1)
Insulator (2) Put in.
73.
New packing (3)
Put in.
74.
Brush plate (4)
Two plates (5)
Put in place.
and grounded brush
holders (6)
75.
Two red screws (7)
Screw in using 3/16-inch fl at-tip screw-
driver but do not tighten.
76.
Two spring
Four springs (9)
Put on.
holders (8)
77.
Two brush
Two spring
Put in place and hook straight end of
holders (6)
holders (8)
springs (9) on brush holder (8) and
hold.
78.
Brush plate (4)
Two screws (10)
With help of assistant, screw in and
tighten using two 3/16-inch flat-tip
screwdrivers.
Make sure springs don't slip
off brush holders.
79.
Two red screws (7)
Tighten using 3/16-inch flat-tip screw-
driver.
TA238206
2-446
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |