 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-269-34-1
TAPPET COVER
This task covers:
a.
Removal (page 2-182)
c.
Inspection/Replacement (page 2-183)
b.
Cleaning (page 2-182)
d.
Installation (page 2-183)
INITIAL SETUP
Tools
Personnel Required
Handle, ratchet, 1/2-inch drive
One
Socket, 1/2-inch drive, 1/2-inch
Equipment Condition
Materials/Parts
Swirl destroyer removed (page 2-236).
Gasket, tappet cover
One cylinder head removed (page 2-102).
Rags, wiping (item 42, appendix B)
Solvent, drycleaning (item 49, appendix B)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Tappet cover (1)
Six screws (2)
Using 1/2-inch socket and ratchet handle
and washers (3)
with 112-inch drive, unscrew and take out.
2. Cylinder block (4)
Tappet cover (1)
a. Take off.
and gasket (5)
b. Get rid of gasket (5).
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-46).
Solvent burns easily. Solvent fumes can explode. Do not smoke or allow open flame nearby when using solvent.
Failure to observe these precautions could cause serious Injury or death.
3.
Tappet cover (1)
a. Clean in drycleanlng solvent.
b. Wipe dry with clean, dry rags.
2-182
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals