|
|
TM 9-2320-269-34-1
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Close left or right side engine compartment hood
(TM 9-2320-269-20-1).
TASK ENDS HERE
SWIRL DESTROYER
This task covers:
a. Removal (page 2-236)
d. Inspection/Replacement (page 2-240)
b. Disassembly (page 2-237)
e. Assembly (page 2-241)
c. Cleaning (page 2-240)
f. Installation (page 2-244)
INITIAL SETUP
Tools
Materials/Parts - Continued
Gage, thickness
Self-locking nuts (two required)
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 49, appendix B)
Pliers, slip-joint, angle-nose
Washers, teflon (four required)
Screwdriver, flat-tip, 1/4-inch
Socket, deep well, 3/8-inch drive,
Personnel Required
11/2-inch
Wrench, open-end, 3/8-inch
One
Wrench, open-end, 7/16-inch
Equipment Condition
Materials/Parts
Intake manifolds removed
Cotter pin, lever and yoke
Lockwashers, mounting strip
(three required)
Rags, wiping (item 42, appendix B)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Stud (1)
Spring (2)
Unhook.
2.
Mounting strip (3)
Three nuts (5) and
a. Using 1/2-inch deep well socket and
and cable
lockwashers (6)
ratchet handle with 3/8-inch drive,
bracket (4)
unscrew and take off.
b. Get rid of lockwashers (6).
2-236
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |