INSTALLATION - TM-9-2320-269-34-10252

TM 9-2320-269-34-1

EXHAUST MANIFOLDS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSTALLATION

10.

Cylinder head (1)

Four new gaskets

Put in position.

(3) and exhaust

manifold (2)

11.

Two new lock plates

a. Screw in, and tighten using 9/16-inch

(5) and screws (6)

deep well socket and ratchet handle

with 112-inch drive.

b. Using 318-inch flat-tip screwdriver,

pry up tab.

12.

Three new lock

a. Screw in, and tighten using 3/4-inch

plates (7) and

socket and ratchet handle with 112-

screws (8)

inch drive.

b. Using 3/8-inch flat-tip screwdriver,

pry up tab.

NOTE

If engine has been removed from vehicle, do not do steps 13 and 14.

13.

Exhaust pipe (9)

Put in position.

14.

Exhaust manifold

Three screws (10),

Screw together, and tighten using 9/16-

(2) and exhaust

six washers (11),

inch deep well socket, and ratchet handle

pipe (9)

and nuts (12)

with 1/2-inch drive, and 9/16-inch open-

end wrench.

TA238051

2-235