INTAKE AND EXHAUST VALVES

TM 9-2320-269-34-1

INTAKE AND EXHAUST VALVES

This task covers:

c. Inspection/Replacement/Repair

d. Installation (page 2-163)

INITIAL SETUP

Tools

Materials/Parts - Continued

Apron, rubber

Oil, engine (item 32, appendix B)

Brush, fine wire

Pencil

Compressor, reciprocating air,

Seal, valve stem (one required for each

power driven

valve to be serviced)

Compressor, valve spring

Spring and damper assembly (one required

Face, inserted hammer, soft-plastic

for each valve to be serviced)

Gloves, rubber

Goggles, safety

Personnel Required

Gun, air blow

Holder, Inserted hammer-face

One

Hose, air compressor

Equipment Condition

Materials/Parts

Cylinder head removed (page 2-102).

Compound, carbon cleaning

(item 11, appendix B)

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

NOTE

Intake and exhaust valves are maintained the same way except for grinding dimensions as noted In

Inspection/Replacement/Repair procedures. One valve is covered. Repeat task as necessary for other

valves.

Keep all parts together so that they may be reinstalled in their proper position.

2-158