 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
9-2350-238-20-2
REASSEMBLY
1
Strip cable insulation equal to depth of
solder wells of pin contacts (1).
2
Slide nut (2) onto cable (3).
Slide grommet (4) over cable leads (5).
3
4
Insert cable leads (5) into solder wells of
pin contacts (1) and solder.
Push insert (6) into shell assembly (7)
5
from rear until seated. Groove (8) in in-
sert (6) must be alined with guide in
shell assembly (7) to ensure proper fit.
6
Push pin contacts (1) into insert (6) from
rear until seated.
7
Push grommet (4) down cable leads (5)
and over solder wells of pin contacts (1).
8
Screw nut (2) onto shell assembly (7).
2-16.
TYPICAL
FEMALE-TYPE
PLUG.
DISASSEMBLEY
1 Unscrew
nut
(1)
from
shell
assembly
(2)
and slide back on cable (3).
2 Slide
grommet
(4)
back
on
cable
leads
(5).
3 Slide coupling (6) off shell assembly (2).
4 Drive
socket
contacts
(7)
out
through
rear of insert (8) with pin extractor.
5 Push insert (8) out through rear of shell
assembly (2).
6 Unsolder
cable
leads
(5)
from
socket
contacts
(7).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals