GENERATOR OUTPUT CIRCUIT. (Cont) - TM-9-2350-238-20-10162

TM 9-2350-238-20-1

2-12. ELECTRICAL CIRCUIT TROUBLESHOOTING (CONT).

Disconnect wiring harness (leads 1, 2, 478, and 506) from voltage

Step 6.

regulator. Disconnect leads 415 and GND from generator cooling fan at

disconnect in driver's compartment. Check resistance between generator

terminal B+ and ground. If multimeter indicates 0 to 4 ohms, go to step 8.

If multimeter indicates more than 4 ohms, replace generator. Refer to

page 2-552. Connect leads 415 and GND to generator cooling fan at

disconnect in driver's compartment. Connect wiring harness to voltage

regulator.

2-136