VEHICLE DOES NOT STOP PROPERLY. - TM-9-2350-238-20-10102

TM 9-2350-238-20-1

2-11. TROUBLESHOOTING INFORMATION (CONT).

Table 2-3. UNIT TROUBLESHOOTING (CONT)

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

72. OIL TEMPERATURE IS TOO HIGH (CONT).

Step 2.

Check for clogged oil lines.

Clean or replace oil lines as required. Refer to page 2-418 and

Step 3.

Check for dirty or clogged transmission oil screen.

Clean transmission oil screen. Refer to page 2-758.

Step 4.

Check for damaged gage and sending unit.

Troubleshoot transmission oil temperature indicator circuit. Refer to

Electrical Circuit Symptom Index, page 2-92.

Step 5.

If problem still exists, notify direct support maintenance.

73, VEHICLE DOES NOT STOP PROPERLY.

Step 1.

Check for faulty brake adjustment.

Adjust brakes. Refer to page 2-820.

Step 2.

Check for damaged brake components.

Repair or replace damaged brake controls and linkages. Refer to page

Step 3.

If problem still exists, notify direct support maintenance.

74. VEHICLE DOES NOT STEER PROPERLY.

Step 1.

Check transmission oil level.

Add or drain oil to proper level. Refer to the PMCS/lubrication table,

Step 2.

Check for unequal track tension.

Adjust track tension. Refer to TM 9-2350-238-10.

2-76