ADJUSTMENT - TM-9-2350-238-20-10846

TM 9-2360-238-20-1

2-141. MAINTENANCE OF PARKING BRAKE ASSEMBLY (CONT).

REASSEMBLY (CONT)

4 Install new spring pin (5) and brake

support pin (6).

5 Install leaf spring (7).

6 Install two flat washers (8) and two

machine screws (9).

7 Install pawl (10) with attached parts.

8 Install retaining ring (11).

9 Install parking brake bracket (12).

10 Install two new Iockwashers (13) and two

machine bolts (14).

ADJUSTMENT

2 Adjust parking brake. Refer to page 2-814.

1 Install parking brake assembly. Refer to

page 2-814.

2-142. MAINTENANCE OF MECHANICAL BRAKE CONTROL AND LINKAGE.

c. Installation

a. Removal

This task covers:

d. Adjustment

b. Inspector/Repair

INITIAL SETUP

Sealing compound (item 37, appx C)

Tools and Special Tools

Sealing compound (item 38, appx C)

Automotive maintenance and repair shop

Self-locking nut (2)

equipment: organizational maintenance,

Spring pin (2)

common no. 1 (less power) (item 80,

appx B)

References

. Torque wrench (0 to 170 ft-lb)

TM 9-2350-238-10

Brake adjustment splined wrench (item 34,

TM 9-2350-238-24P-1

appx G)

Brake adjustment splined wrench (item 35,

Equipment Conditions

appx G)

2-938 Hull transmission compartment

Wood blocks

deck assembly removed

2-816 Braking shaft and ratchet

Materials/Parts

installed

Gasket (2)

Parking brake released

Lockwasher

Lockwasher (4)

2-820