|
|
TM 9-2350-238-20-1
2-37. MAINTENANCE OF EXTERNAL OIL LINES AND FITTINGS (UPPER ENGINE).
This task covers:
a. Removal
b. Inspection/Repair
c. Installation
INITIAL SETUP
Materials/Parts
Equipment Conditions
Filter element (2)
2-384 Powerplant removed
Lockwasher (4)
2-938 Hull transmission compartment
Lockwasher (3)
deck assembly removed
Lockwasher (8)
2-935 Hull engine compartment deck
Lockwasher (4)
assembly lid removed
Preformed packing (2)
Preformed packing (3)
Self-locking nut (4)
References
TM 9-2350-238-10
TM 9-2350-238-24P-1
TM 9-2815-202-24P
1 Place suitable container under fluid filter
(1).
2 Remove two drain plugs (2) and drain oil
into container.
3 Remove capscrew (3) from loop clamp (4),
and remove loop clamp from nonmetallic
hose assembly (5).
4 Disconnect nonmetallic hose assembly (5)
from pipe to tube elbow (6).
5 Remove pipe to tube elbow (6) from drain
cock (7).
6 Loosen nut (8) on drain cock (7), and
remove drain cock from angle bracket (9).
2-418
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |