WINDSHIELD WASHER CONTROL VALVE

TM 9-2320-270-20-3

WINDSHIELD WASHER RESERVOIR - CONTINUED

NOTE

FOLLOW-ON MAINTENANCE:

1. Close left side of hood (TM 9-2320-270-10).

2. Check operation (TM 9-2320-270-10).

TASK ENDS HERE

WINDSHIELD WASHER CONTROL VALVE

This task covers:

d. inspection/Replacement (page 4-1 184)

b. Disassembly (page 4-1184)

f. installation (page 4-1184)

INITIAL SETUP

Materials/Parts Continued

Tools

Soap, liquid (item 14, appendix C)

Extension, 5-inch, 3/8-inch drive

Tape, teflon (item 22, appendix C)

Hammer, plastic

Handle, ratchet, 3/8-inch drive

Personnel Required

Pliers, long-nose, round

Pliers, slip-joint, straight-nose

Two

Socket, 7/16-inch, 3/8-inch drive

Vise

Equipment Condition

Wrench, box, 7/16-inch

Wrench, open-end, 7/16-inch

Left side of hood opened

Wrench, open-end, 9/16-inch

(TM 9-2320-270-10).

Materials/Parts

Lockwasher, windshield washer control

valve to firewall (two required)

ACTION

iTEM

REMARKS

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

4-1182