|
|
TM9-2320-270-20-3
HYDRAULIC RESERVOIR -CONTINUED
INSTALLATION CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install hydraulic oil filters (page 4-1172).
2.
Fill hydraulic reservoir (page 4-1160).
3.
Install spare tire mount (page 4-1055.
4.
Install spare tire (TM 9-2320-270-10).
TASK ENDS HERE
HYDRAULIC OIL FILTER
This task covers:
a. Removal (page 4-1172)
b. Installation (page 4-1174)
INITIAL SETUP
Materials/Parts Continued
Tools
Adhesive, sealant (item 1, appendix C)
Knife, putty
Fluid, hydraulic (LO 9-2320-270-12)
Wrench, adjustable, 0 to 3 5/8-inch
Lockwashers (four required)
Wrench, filter
Rags, wiping (item 10, appendix C)
Wrench, open-end, 1/2-inch
Wrench, pipe
Personnel Required
Materials/Parts
One
Gasket
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
There are two hydraulic oil filters. This procedure covers one. Repeat as necessary for
other.
a. Using filter wrench, unscrew and take
Oil filter (2)
1. Filter base (1)
off.
b. Using rags, clean up any spills.
4-1172
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |