|
|
TM9-2320-270-20-3
HYDRAULIC OIL FILTER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION
Apply thin coat of hydraulic oil.
Gasket ring (2)
7. Oil filter (1)
Screw in.
Oil filter (1)
8. Filter base (3)
Do not overtighten.
New gasket (5)
Put on.
9. Plate (4)
Filter screen
Using adjustable wrench, screw on and
10. Filter screen
nut (7)
tighten.
assembly (6)
Plate (4)
a. Apply sealant around hole in reservoir
11. Reservoir (8)
and in each screw hole.
b. Place in position.
Using 1/2-inch wrench, screw in and
Four screws (9) and
12 Plate (4)
new Iockwashers (10)
tighten.
Union (12)
Using pipe wrench, screw on and tighten.
13. Pipe (11)
.
NOTE
FOLLOW-ON MAINTENANCE: Check for leaks (TM 9-2320-270-10).
TASK ENDS HERE
TA240731
4-1174
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |