|
|
TM9-2320-270-20-3
WINCH PROPELLER SHAFT
This task covers:
a. Removal (page 4-1175)
b. Installation (page 4-1176)
INITIAL SETUP
Tools
Personnel Required
Bar, pry
One
Hammer, machinist's, ball-peen
Key, socket-head screw, 3/16-inch
Equipment Condition
Punch, drive pin, 5/32-inch
Spare tire removed (TM 9-2320-270-10).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Two yokes (1)
Two screws (2)
Using 3/16-inch key, unscrew.
2. Two shafts (3)
Two yokes (1)
a. Using hammer, tap to break loose.
b. Using pry bar, take off.
3. Two keyways (4)
Two keys (5)
Using hammer and 5/32-inch punch, drive
out.
4-1175
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |