SECONDARY AIR RESERVOIR

TM9-2320-270-20-2

SECONDARY AIR RESERVOIR

This task covers:

d. Inspection/Replacement (page 4-681)

a. Removal (page 4-676)

e. Assembly (page 4-682)

b. Disassembly (page 4-678)

f. Installation (page 4-684)

c. Cleaning (page 4-681)

INITIAL SETUP

Materials/Parts

Tools

Lockwasher, air reserboir bracket

Hammer, plastic

thru-bolt (two required)

Handle, ratchet, 1/2-inch drive

Soap, liquid (item 14, appendix C)

Socket, 9/16-inch, 1/2-inch drive

Tag, marking (item 18, appendix C)

Pliers, long-nose, round

Tape, teflon (item 22, appendix C)

Vise

Wrench, box, 9/16-inch

Personnel Required

Wrench, open-end, 5/8-inch

Wrench, open-end, 7/8-inch

One

Wrench, open-end, 15/16-inch

Wrench, open-end, 1 1/16-inch

Wrench, open-end, 1 1/8-inch

Wrench, open-end, 1 3/8-inch

Wrench, pipe, 15-inch

ACTION

ITEM

REMARKS

LOCATION

REMOVAL

WARNING

Make sure all pressure is drained from air system before disconnecting air lines. Parts

under pressure can, when removed, fly off with great force causing injury to personnel.

NOTE

Tag air lines according to general maintenance instructions (page 4-1).

Air system

Drain (TM 9-2320-270-10).

Nut (3)

Using 5/8-inch wrench, unscrew and pull

2. Air line 654 (1) to

back.

elbow (2)

Pull out.

Airline 654 (1)

3. Elbow (2)

4-676