|
|
TM 9-2320-270-20-1
STARTER
This task covers:
a. Removal (page 4-228)
b. Installation (page 4-230)
INITIAL SETUP
Materials/Parts Continued
Tools
Lockwasher, starter to engine (three
Extension, 6-inch, 3/8-inch drive
requ i red)
Handle, ratchet, 3/8-inch drive
Tags, marking (item 18, appendix C)
Joint, universal, 3/8-inch drive
Screwdriver, flat-tip, 3/16-inch
Personnel Required
Socket, 5/8-inch, 3/8-inch drive
Socket, deep well, 3/4-inch with
Two
3/8-inch drive
Equipment Condition
Materials/Parts
Left side of hood open and left side panel
Gasket
removed (TM 9-2320-272-1 0).
Lockwasher, starter battery terminal
Battery ground cable disconnected
Lockwasher, starter ground terminal
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
WARNING
Make sure battery ground cable is disconnected before doing this task. Failure to dis-
connect battery ground cable can cause injury to personnel and damage to electrical
system.
NOTE
Tag wires according to general maintenance instructions (page 4-1).
4-228
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |