|
|
TM 9-2320-270-20-1
STARTER - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
a. Using 3/4-inch socket and handle,
Nut (2) and
3. Battery terminal (1)
unscrew and take off.
Iockwasher (3)
b. Get rid of Iockwasher (3).
Take off.
Battery cable (4),
4.
wire 046 (5), and
wire 278 (6)
Using screwdriver, unscrew and take off.
Screw (8) and wire
5. Ignition switch
045 (9)
terminal (7)
NOTE
Have assistant support starter while removing screws.
a. Using 5/8-inch socket, universal joint
Three screws (12)
6. Starter (10) to
extension, and handle, unscrew and
and Iockwasher (13)
engine (11)
take out.
b. Get rid of Iockwashers (13).
a. Take out from underneath.
Starter (10) and
7. Engine (11)
b. Get rid of gasket (14).
gasket (14)
INSTALLATION
With help from assistant, put in position.
Starter (10) and
8. Engine (11)
new gasket (14)
Screw in and tighten using 5/8-inch socket,
Three screws (12)
9. Starter (10) to
universal joint, extension, and handle.
and new lock-
engine(n)
washers (13)
Screw in and tighten using screwdriver.
Wire 045 (9), and
10. Ignition switch
screw (8)
terminal (7)
a. Put on.
Wire 278 (6), wire
11. Battery terminal (1)
b. Screw on and tighten using 3/4-inch
046 (5), battery
socket handle.
cable (4), new lock-
washer (3) and nut (2)
4-230
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |