|
|
TM9-2320-270-20-1
FUEL TANKS
This task covers:
d. Left Fuel Tank Installation (page 4-73)
a. Right Fuel Tank Removal (page 4-66)
e. Right Fuel Tank Installation (page 4-76)
b. Left Fuel Tank Removal (page 4-70)
c. Cleaning and Inspection (page 4-73)
INITIAL SETUP
Materials/Parts
Tools
Lockwasher
Handle, ratchet, 3/8-inch drive
Handle, ratchet, 1/2-inch drive
Personnel Required
Screwdriver, cross-tip, no. 2
Screwdriver, flat-tip
Two
Socket, 7/16-inch, 3/8-inch drive
Socket, 15/16-inch, 1/2-inch drive
Equipment Condition
Wrench, open-end, 7/16-inch
Wrench, open-end, 3/4-inch
Right and left fuel tanks drained (page 4-32).
Wrench, open-end, 7/8-inch
.
Wrench, open-end, 15/16-inch
Wrench, open-end, l-inch
Wrench, pipe, 14-inch
ACTION
REMARKS
ITEM
LOCATION
RIGHT FUEL TANK REMOVAL
WARNING
No open flames, welding, grinding, smoking, or use of heat producing devices
permitted near fuel tank and fuel lines during maintenance unless the fuel tank has been
cleaned and purged of all flammable liquids and vapors. Fuel burns easily and fumes are
explosive. Keep battery disconnected. Failure to observe these precautions could cause
serious injury.
Remove (page 4-390).
Fuel sending
1. Fuel tank
unit
Using l-inch wrench, unscrew and take off.
Fuel supply hose (2)
2. Elbow (1)
Using 3/4-inch wrench, unscrew and take
Fuel return hose (4)
3. Elbow (3)
off.
4-66
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |