 |
|||
|
|
|||
|
Page Title:
ROCKER ARM AND VALVE COVER AND GASKET |
|
||
| ||||||||||
|
|
 TM9-2320-270-20-1
ROCKER ARM AND VALVE COVER AND GASKET
This task covers:
d. Assembly (page 4-15)
a. Removal (page 4-12)
e. Installation (page 4-16)
b. Disassembly (page 4-14)
c. Cleaning and Inspection
INITIAL SETUP
Materials/Parts Continued
Tools
Cotter pin
Drift, brass, 1/2-inch
Isolator (two required)
Extension, 1/4-inch drive
Rags, wiping (item 10, appendix C)
Hammer, plastic face, medium
Seal
Handle, ratchet, 1/4-inch drive
Wrap, tie (item 24, appendix C)
Pliers, slip-joint, straight-nose
Screwdriver, flat-tip, 1/4-inch,
Personnel Required
4-inch blade
Socket, 5/16-inch, 1/4-inch drive
One
Socket, 3/8-inch, 1/4-inch drive,
12-point
Equipment Condition
Wrench, open-end, 9/16-inch
Right or left side of hood open and right or
Materials/Parts
left side panel removed
(TM 9-2320-270-10).
Gasket
Grease (LO 9-2320-270-12)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using screwdriver, unscrew part way.
Screw (2)
1. Oil breather hose
clamp (1)
Pull off.
Oil breather
2. Oil breather
Leave clamp on hose.
hose (4)
housing (3)
a. Using pliers, cut off.
Tie wrap (5)
3. Oil breather
b. Get rid of.
hose (4)
Using wrench, unscrew and take out.
Screw (8)
4. Clamp (6) to
engine (7)
Take off.
Clamp (6)
5. Oil breather
hose (4)
4-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals