|
|
TM9-2320-270-20-1
ROCKER ARM AND VALVE COVER AND GASKET - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
CLEANING AND INSPECTION
All parts
Clean and inspect as shown in the general
18.
maintenance instructions (page 4-1).
ASSEMBLY
a. Put in position.
New seal (12)
19. Rocker arm and
b. Coat with grease.
valve cover (1)
NOTE
Make sure inlet on oil breather housing faces rear of engine.
Put in.
20. Rocker arm and valve
Oil breather
housing (9)
cover (1)
Retainer (11) and
21. Oil breather
Put in.
housing (9)
filter element (10)
Plate (7)
22. Rocker arm and valve
Put on.
cover (1)
23. Plate (7) to rocker
Three screws (8)
Screw in and tighten using 5/18-inch
arm and valve
socket, extension, and handle.
cover (1)
TA239801
4-15
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |