|
|
TM9-2320-270-20-1
ROCKER ARM AND VALVE COVER AND GASKET- CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ASSEMBLY CONTINUED
NOTE
Do steps 24, 25, and 26 for right side rocker arm and valve cover only.
Using hammer and brass drift, tap in.
Strainer (2)
24. Rocker arm and valve
cover (1)
a.
Put on end of chain (4) and into
New cotter pin (3)
25. Strainer (2)
strainer (2).
b.
Using pliers, bend ends out.
a.
Using pliers, put on S-hook (6).
Oil filler cap (5)
26. Rocker arm and valve
b.
Put in.
cover (1)
c.
Screw in and tighten.
INSTALLATION
Put into groove.
27. Rocker arm and valve
New gasket (7)
cover (1)
Put on.
Rocker arm and valve
28. Engine (8)
cover (1)
Screw in and tighten using 3/8-inch
Two screws (9),
29. Rocker arm and
socket, extension, and handle.
washers (10), and
valve cover (1)
Long screw goes on rear side of
new isolators (11)
to engine (8)
engine.
TA239802
4-16
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |