ENGINE FAILS TO CRANK CONTINUED. - TM-9-2320-270-20-10072

TM9-2320-270-20-1

TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

1. ENGINE FAILS TO CRANK CONTINUED.

Open right side of hood and remove right side panel (TM 9-2320-270-10).

Step 11.

Have assistant turn ignition key to START position. Using multimeter set at

30 vdc, put red probe on magnetic switch power terminal (1) and black probe

on bulkhead (2).

If meter reads no voltage, close instrument panel (page 4-244), install

left and right side panels, close right side of hood (TM 9-2320-270-

10), and notify direct support maintenance.

Using multimeter set at 30 vdc, put red probe on magnetic switch terminal (3)

Step 12.

and black probe on bulkhead (2).

If meter reads no voltage, replace switch (page 4-232), close

instrument panel (page 4-244), install right and left side panels and

close right side of hood (TM 9-2320-270-10).

3-10