|
|
TM9-2320-270-20-1
TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. ENGINE FAILS TO CRANK CONTINUED.
Using multimeter set at 30 vdc, put red probe on starter relay terminal (1) and
Step 7.
black probe on cab wall (2).
If meter reads no voltage, turn key to OFF position, close instrument
paneI (page 4-244), install left side panel, close left side of
hood (TM 9-2320-270-10), and notify direct support maintenance.
Using multimeter set at 30 vdc, put red probe on relay terminal (3) and
Step 8.
black probe on cab wall (2).
If meter reads no voltage, turn key to OFF position, replace relay
panel, and close left side of hood (TM 9-2320-270-10).
3-8
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |