ENGINE FAILS TO CRANK CONTINUED.

TM9-2320-270-20-1

TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

1. ENGINE FAILS TO CRANK CONTINUED.

Open instrument panel (page 4-244). Using multimeter set at 30 vdc, put red

Step 3.

probe on ignition switch BATT terminal (1) and black probe on panel (2).

If multimeter reads no voltage, turn key to OFF position, close

instrument panel (page 4-244), install left side panel, close left

side of hood (TM 9-2320-270-10), and notify direct support

maintenance.

Turn key to START position and using multimeter set at 30 vdc, put red probe

Step 4.

on ignition switch START terminal (3), and black probe on panel (4).

If meter reads no voltage, turn key to OFF position, replace ignition

switch (page 4-246), install left side panel, and close left side of

hood (TM 9-2320-270-10).