|
|
TM 9-2320-269-34-1
ENGINE OIL PUMP
This task covers:
a. Removal (page 2-208)
d. Inspection/Replacement (page 2-212)
b. Disassembly (page 2-209)
e. Assembly (page 2-213)
c. Cleaning (page 2-212)
f. Installation (page 2-216)
INITIAL SETUP
Tools
Materials/Parts
Caliper, micrometer, OD,
Gasket, pump body
0-2-inch range
Gasket, cover (two required)
Gage, ribbon thickness
Lockwashers, cover (four required)
Hammer, ball-peen, machinist's
Lockwashers, pump (two required)
Handle, ratchet, 3/8-inch drive
Lockwashers, bracket (two required)
Indicator, dial
Oil, engine, (item 32, appendix B)
Pliers, snapring
Rags, wiping (item 42, appendix B)
Press, arbor, hand operated
Solvent, drycleaning, (item 49, appendix B)
Punch, drive-pin, 118-inch
Rule, machinist's, 18-inch
Personnel Required
(two required)
Socket, 3/8-inch drive, 1/2-inch
One
Socket, 3/8-inch drive, 9/16-inch
Wrench, open-end, 1/2-inch
Equipment Condition
Wrench, open-end, 9/16-inch .
Wrench, open-end, 1 1/8-inch
Engine oil pan removed (page 2-203).
Wrench, open-end, 2-inch
Wrench, pipe, 14-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Bracket (1)
Screw (2), washer
a.
With engine bottom facing up, and using
(3), lockwasher (4),
9/16-inch socket and handle w ith 3/8-
and nut (5)
inch drive, and 9/16-inch open-end
wrench, unscrew and take out.
b.
Get rid of lockwasher (4).
It may be necessary to turn crank-
shaft using 2-inch open-end wrench
to get crankshaft weights out of way.
2.
Pump (6)
Two screws (7) and
a.
Using 9/16-inch open-end wrench,
lockwashers (8)
unscrew and take out.
b.
Get rid of lockwashers (8).
2-208
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |