|
|
TM 9-2320-269-34-1
ENGINE OIL PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
38. Float assembly (1)
Connector (2)
Screw on.
39. Pump body (3)
Float assembly (1)
Screw on.
40. Float assembly (1)
Connector (2)
Screw on, and tighten using 1 1/8-inch
open-end wrench.
INSTALLATION
41. Cylinder block (4)
Pump (5)
a.
Place in position.
b.
Lay machinist's rule across oil
pan rails.
c.
Using another machinist's rule,
measure distance from bottom of first
rule to top of screen, on both sides.
Pump float assembly (1) must be
parallel and 6 112 inches
(165.1 mm) above oil pan rails.
d.
Take off rule.
42. Pump (5)
Two new lockwashers
Screw in, and tighten using 9/16-inch
(6) and screws (7)
open-end wrench.
43. Cylinder block (4)
Bracket (8)
Put in position.
TA238039
2-216
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |