 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-1240-322-34&P
3-2.
INSPECTION UPON RECEIPT (CONT)
Step
Procedure
Maintenance Action
Reference
1.
Using #2 Phillips screwdriver,
Tighten. Replace if missing.
...
check that three screws (1) are
tight.
2.
Using fingers, check that lamp
Tighten. Replace if missing.
assembly (2) is tight.
3.
Using 3/8" wrench, remove cap
Tighten valve. If cap or
(3). Using valve core wrench,
valve is missing, replace. If
valve stem is bent, replace.
check that valve core (4) is
tight and seated. Valve stem
Tighten stem if loose.
should be straight. Using 7/16"
wrench, check that stem (5) is
tight. Using 3/8" wrench, install
cap (3).
4.
Replace.
Check that knob (6) turns from
stop to stop without binding.
5.
Tighten. Replace if missing.
Using #2 Phillips screwdriver,
...
check that six screws (7) are
tight.
6.
Using #1 Phillips screwdriver,
Tighten. Replace if missing.
...
check that three screws (8) are
tight.
7.
Check that identification plate
If identification tdate cannot
...
(9) can be read.
be read, tell your supervisor.
GO TO FRAME 4
Para 3-2 Cont
3-4
Vol II
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals