|
|
TM 9-1240-322-34&P
INSPECTION UPON RECEIPT (CONT)
3-2.
FRAME 4
Step
Procedure
Maintenance Action
Reference
1.
Using 3/32" Allen wrench,
Tighten. Replace if missing.
...
check that setscrew (1) is tight.
2.
Using 5/64" Allen wrench,
Tighten. Replace if missing.
...
check that setscrew (2) in knob
(3) is tight.
3.
Check that knob (3) turns from
Replace.
stop to stop without binding.
4.
Check that knob (4) turns from
Replace.
stop to stop without binding.
5.
Using #2 Phillips screwdriver,
Tighten. Replace if missing.
...
check that four screws (5) are
tight.
Check receptacle (6) for dents
6.
Replace.
and damaged threads.
7.
Check that two pins (7) are not
Replace.
burned or missing.
GO TO FRAME 5
Para 3-2 Cont
Vol II
3-5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |