 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-1240-322-34&P
INSPECTION UPON RECEIPT (CONT)
3-2.
tep
Procedure
Maintenance Action
Reference
1.
Using 3/8" screwdriver, check
...
Tighten. Replace if missing.
that plug (1) is tight.
...
Tighten. Replace if missing.
2.
Using #2 Phillips screwdriver,
check that six screws (2) are
tight.
Tighten. Replace if missing.
...
3.
Using 9/16" open end wrench,
check that nut (3) is tight.
Check that toggle switch (4)
4.
Replace switch.
moves to ON/OFF positions
without binding.
...
5.
If decal cannot be read, tell
Check that ON/OFF decal (5)
your supervisor.
can be read.
6.
Tighten. Replace if missing.
...
Using #2 Phillips screwdriver,
check that four screws (6) are
tight.
7.
Tighten. Replace if missing.
...
Using #1 Phillips screwdriver,
check that two screws (7) are
tight.
Tighten. Replace if missing.
...
8.
Using .050" Allen wrench, check
that setscrew (8) is tight.
GO TO FRAME 3
Para 3-2 Cont
3-3
Vol II
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals