Section 5. LAMP ASSEMBLY

TM 9-1240-322-34&P

Section 5. LAMP ASSEMBLY

4-12.

LAMP ASSEMBLY MAINTENANCE PROCEDURES INDEX

Reference (para)

Task

4-13

Disassembly

4-14

Assembly

LAMP ASSEMBLY DISASSEMBLY

TOOLS: 53/64" tubular spanner wrench

#2 cross tip screwdriver (Phillips type)

PERSONNEL: One

Tagging wires

REFERENCES: JPG 41C for:

Unsoldering wires

EQUIPMENT CONDITION: Infinity sight on work bench

FRAME 1

Procedure

Step

Using fingers, remove lampholder assembly (1), gasket (2) and lamp (3) from lamp

assembly housing (4).

Using wrench, remove ring (5). Carefully pull out terminal (6) from lamp assembly

housing (4).

Tag two wires (7) connected to terminal (6) (JPG).

Using soldering iron, unsolder two wires from terminal (6) (JPG).

Using screwdriver, remove three screws (8) and three washers (9) from lamp assembly

housing (4).

Remove lamp assembly housing (4) from infinity sight housing (10).

END OF TASK

Vol II

4-8