Chapter 1 INTRODUCTION - TM-9-1220-220-340031

TM 9-1220-220-34

CHAPTER 1

INTRODUCTION

Section 1. GENERAL

1-1.

SCOPE

This volume contains maintenance requirements and procedures for direct support and general support (DS/GS)

maintenance for the M10 Series Ballistic Drive. See Volume I for troubleshooting Procedures.

1-2.

ORGANIZATION

a. Chapter 2, General Maintenance Information, lists the maintenance items and references other procedures

that are necessary to do the maintenance in this manual.

b. Chapter 3, Inspection Upon Receipt, gives the kind of defects to look for when the ballistics drive is returned

to DS/GS. A complete inspection should be made and faults listed on DA Form 2404 before any repairs are made.

c. Chapter 4, Maintenance Procedures, gives step-by-step procedures to repair faults found during inspection of

troubleshooting.

Chapter 5, Final Inspection, gives procedures to be done after repair to make sure that the ballistics drive

works.

Chapter 6, Packaging, gives procedures for packaging the ballistics drive for storage or shipment.

Appendix A, Expendable Supplies and Materials List, lists the supplies and materials needed to repair the

ballistics drive.

Appendix B, Maintenance Task Index, helps you find the necessary maintenance tasks for the ballistics drive.

h. Appendix C, Fabricated Tools, gives drawings with dimensions and use of each tool, so you can have the

tools made.

Para 1-1 Vol II

1-1