|
|
![]() TM 9-1220-220-34
CHAPTER 5
FINAL INSPECTION
5-1.
SCOPE
This chapter gives final inspection and maintenance procedures to be done after repairing the M10 Series Ballistics Drive.
5-2.
BALLISTICS DRIVE FINAL INSPECTION
PERSONNEL:
One
REFERENCES:
JPG 41C for cleaning
TM 10 for: Operating gun
Boresighting
(TM 9-2350-215-10 for M60A1,
TM 9-2350-257-10 for M60A1 Rise, and
TM 9-2350-260-10 for M60).
TM 20-2 for synchronizing and aligning (TM 9-2350-
215-20-2 for M60A1, TM 9-2350-257-20-2 for M60A1
Rise, and TM 9-2350-260-20-2 for M60)
EQUIPMENT CONDITION: Ballistics drive installed in vehicle
NOTE
If you find a fault, tell your supervisor. If you do not find a fault, send ballistics drive back into
service.
Para 5-1 Vol II
5-1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |