|
|
TM 55-1520-238-S
CARGO
DECK FLOOR
MAIN ROTOR BLADES
TIEDOWN
M05-072
215.6 Unload
Two
Horizontal
Stabilators.
215 HELICOPTER OFFLOADING (C5
Remove one stabilator from cargo floor, to right of tail of
AIRCRAFT, FRONT DOOR).
helicopter number five and one from under nose of heli-
copter number six.
WARNING
215.7 Unload Four Main Rotor Blades. Remove
two main rotor blade rack sets from cargo floor, under
helicopter helicopter six.
To prevent injury to personnel and
damage to helicopter and cargo air-
215.8 Unload Eight Hellfire Launchers. Remove
craft all helicopters will remain re-
eight packed launchers containers from left side of car-
strained by chains until winch cable is
go floor, beside helicopter number six.
attached for unloading.
Helicopter and components off loading from C5 will be
conducted in accordance with procedures outlined in
FO1.
215.1 Remove
Tiedowns
from
Helicopter
Components and Ground Support Equipment.
Unfasten and remove tiedown straps from ramp and
WARNING
cargo floor locations securing components and ground
support equipment.
To prevent injury to personnel and
damage to helicopter and cargo air-
215.2 Unload Rocket Launchers. Remove twelve
craft from helicopter rolling free,
boxed rocket launchers from left side of forward cargo
chocks shall be in place and cargo
ramp.
winch cable attached, with slack re-
215.3 Unload Ground Support Equipment.
moved, prior to removing tiedown
chains.
Remove boxed ground support equipment from left side
of forward ramp.
To prevent injury to personnel or
damage to helicopter and cargo air-
215.4 Unload Shoring. Remove shoring from right
craft in the event of winch failure, the
side of cargo aircraft floor beside helicopter number six.
helicopter CPG station will be occu-
215.5 Stow C5 Crew StairLadder. Retract crew
pied by a qualified person to operate
ladder, and stop in up position (loadmaster only).
brakes.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |