PRINTER DOES NOT PRINT

TM 5-6350-275-24&P

Table 3-2. Primary Monitor Console DS Maintenance Troubleshooting - Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

12. PRINTER DOES NOT PRINT (See Figure 3-2)

WARNING

High voltage exists inside the printer assembly. Be careful while making voltage checks, and remove

power while replacing assemblies. Otherwise serious injury or death may occur, and serious damage to

the equipment may occur.

Step 1. Check the power indication on the printer front panel assembly. The lamp should be on.

If power on lamp is off, remove the input power cable and check for 120 vac at the input receptacle.

If voltage is present, replace the ac power cord (Para. 3-24).

If the power on lamp is on, replace the serial interface cable (Para. 3-24).

If printer still does not print, replace the serial interface PWA (Para. 3-25).

If the printer still does not print, replace the printer assembly (Para. 3-24).

If printer still does not print, replace the B38 or B39 CPU (Para. 3-19 or 3-10).

3-11