Installation - TM-9-2350-238-20-11053

TM 9-2350-238-20-1

For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

1 Inspect for broken, damaged, or missing

Electrical wires are manufactured items,

parts.

2 For repair of cable terminals and shell con-

Blower assembly is a repairable assembly.

nectors, refer to general maintenance,

Notify direct support maintenance.

Repair is by replacement of authorized

3 Lacing cord is a manufactured item, refer

parts (TM 9-2350-238-24P-1).

For reassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

2 If removed, install new lacing cord (5) in

1 Position blower assembly (1) in hull, and

fuel filter heater (6). Install fuel filter

secure with six new Iockwashers (2), six

heater (6) on fuel filter (7).

screws (3), and new lockwire (4).

NOTE

3 Install screw (8) to connect ground lead (9)

of fuel filter heater (6).

Steps 2 and 3 are written for one fuel

filter heater, but apply to both fuel fil-

ter heaters.

2-1027