 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2-149. MAINTENANCE OF IDLER WHEEL VEHICULAR WHEEL HUB AND HUB CAP
RADIO STATIC SUPPRESSION SPRING (CONT).
INSTALLATION (CONT)
NOTE
NOTE
The completed wheel assembly must
Steps 14 and 15 apply to installation
have between 0.0005 and 0.0050 in.
of hub cap radio static suppression
(0.0013 to 0.0127 cm) actual end
spring.
play.
14 Install hub cap radio static suppression
spring (15) and pipe plug (16) in access
9 Using face socket wrench, turn round plain
nut (9) clockwise and, at the same time,
cover (17).
rotate idler wheel vehicular wheel hub (2),
first in one direction, and then the other,
15 Install new hub access cap gasket (18),
until there is a slight bind.
access cover (17), six new Iockwashers
(19), and six hexagon head capscrews
10 Back off round plain nut (9) 1/6 to 1/4 turn.
(20) .
11 Lock round plain nut (9) in this position by
installing flat washer (12), being sure that
to 32 to 35 ft-lb (43 to 47 N-m) (dry) or to
hole indexes with pin.
23 to 25 ft-lb (31 to 34 N-m) (lubricated).
12 Install new flat washer (13) and hexagon
17 Lubricate idler wheel vehicular wheel hub
plain nut (14).
(2). Refer to TM 9-2350-238-10.
13 Tighten hexagon plain nut (14).
2-868
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals