 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
2 Install outer roller bearing cup (3) in idler
wheel vehicular wheel hub (2), using
bearing inserter set (item 14, appx G) and
remover and replacer handle.
Install seal assembly (4) on idler wheel spindle (5). Ensure that drive pins on seal mate with
3
holes on spindle flange.
Pack inner cone and rollers (6) with grease. Seat inner cone and rollers (6) firmly against collar
4
of idler wheel spindle (5).
Install new hub seal gasket (7), idler wheel vehicular wheel hub (2), and outer cone and rollers
5
(8) on idler wheel spindle (5).
Align mounting holes in idler wheel vehicular wheel hub (2), hub seal gasket (7), and seal
6
assembly (4).
Screw round plain nut (9) onto idler wheel spindle (5) until it is fingertight.
7
Install eight new Iockwashers (10) and hexagon head capscrews (11). Torque capscrews in a
8
cross-pattern sequence to 32 to 35 ft-lb (43 to 47 N-m) (dry) or to 23 to 25 ft-lb (31 to 34 N-m)
(lubricated).
2-867
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals