|
|
TM 9-2350-238-20-1
2-149. MAINTENANCE OF IDLER WHEEL VEHICULAR WHEEL HUB AND HUB CAP
RADIO STATIC SUPPRESSION SPRING (CONT).
1 If damaged, remove ten ribbed neck bolts
(1) from hub (2).
2 Remove safety relief valve (3) and
lubrication fitting (4).
1 Inspect for broken, damaged, or missing parts.
2 If hub is damaged, repair is by replacement of next higher assembly.
3 Repair is by replacement of authorized parts (TM 9-2350-238-24P-1) which do not meet
inspection criteria.
1 Install safety relief valve (1) and lubrication
fitting (2) on hub (3).
2 If removed, install ten new ribbed neck
bolts (4).
NOTE
q Procedures are written for one idler
wheel arm and hub assembly, but
apply to both.
Ensure that roller bearing cups are
q
firmly seated against interior
flanges of idler wheel vehicular
wheel hub.
1 Install inner roller bearing cup (1) in idler
wheel vehicular wheel hub (2), using
bearing inserter set (item 15, appx G) and
remover and replacer handle.
2-866
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |