|
|
TM 9-2350-238-20-1
Using face wrench socket, remove round
6
plain nut (10).
Ensure that outer roller bearing does
not fall on ground.
Slide idler wheel vehicular wheel hub (11)
7
from idler wheel spindle (12).
Remove outer cone and rollers (13) from
8
idler wheel vehicular wheel hub (11).
Remove eight hexagon head capscrews
9
(14), eight Iockwashers (15), seal
assembly (16), hub seal gasket (17), and
inner cone and rollers (18) from idler
wheel vehicular wheel hub (11).
Remove outer roller bearing cup (19) from
10
idler wheel vehicular wheel hub (11), using
bearing inserter set (item 14, appx G) and
remover and replacer handle.
Remove inner roller bearing cup (20) from
11
idler wheel vehicular wheel hub (11), using
bearing inserter set (item 15, appx G) and
remover and replacer handle.
2-865
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |