|
|
TM 9-2350-238-20-1
2-147. MAINTENANCE OF IDLER WHEEL, ROADWHEEL WHEEL, AND LEFT
LUBRICATION TUBE.
c. Installation
b. Inspection/Repair
a. Removal
This task covers:
INITIAL SETUP
Materials/Parts
Tools and Special Tools
Gasket
Automotive maintenance and repair shop
LockWasher (10)
equipment: organizational maintenance,
Preformed packing
common no. 1 (less power) (item 80,
Self-locking nut (100)
Tube fitting locknut
q Breaker bar
q Socket (1-1/4-in., 3/4-in. drive)
References
q Torque wrench (0 to 600 ft-lb)
TM 9-2350-238-10
q Jack
TM 9-2350-238-24P-1
Wood blocks
Personnel Required
Two
NOTE
Steps 1 thru 24 are written and
illustrated for left side of vehicle
but apply to both sides.
Steps 1 thru 8 apply to removal
of idler wheel or number 1 road-
wheel.
1 Remove track from top of roadwheels and
trailing idler wheel. Refer to page 2-873.
2 Loosen ten self-locking nuts (1) one-half
turn.
3 Place 4 x 4 x 24-in. (10 x 10 x 61-cm)
wood block between track guides in front
of idler wheel (2) or roadwheel (3).
4 Move vehicle forward until idler wheel (2)
or roadwheel (3) is on wood block.
5 Lock suspension.
6 Back vehicle off wood block.
2-848
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |