 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2350-238-20-1
1
Install roadwheel suspension hub (1) and
4 Install new lock bearing nut (6) and
hexagon plain nut (7), and tighten hexagon
assembled parts on roadwheel pivot arm
plain nut.
assembly (2).
2
Install round plain nut (3).
NOTE
Steps 5 and 6 apply to installation of
NOTE
hub cap radio static suppression
The completed wheel assembly must
spring.
have between 0.0005 and 0.0050 in.
(0.0013 and 0.0130 cm) actual end
5 Install hub cap radio static suppression
play.
spring (8) and pipe plug (9) in access
cover (10).
To adjust outer roller bearing (4), perform
3
the following.
6 Install new hub cap gasket (11), access
cover (10), six new Iockwashers (12), and
a.
Using face wrench socket, turn round
six hexagon head capscrews (13).
plain nut (3) clockwise, and at the
same time, rotate roadwheel suspen-
sion hub (1), first in one direction, and
to 32 to 35 ft-lb (43 to 47 N-m) (dry) or 23
then the other, until there is a slight
to 25 ft-lb (31 to 34 N-m) (lubricated).
bind.
8 Lubricate roadwheel suspension hub.
Back off round plain nut (3) 1/6 to 1/4
b.
Refer to TM 9-2350-238-10.
turn.
Install flat washer (5).
c.
2-847
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals